Rotax 582 UL series Operator's Manual page 44

4.1) Re-Start during flight
Engine stop
4.2) Exceeding max. admissible engine speed
Exceeding engine
speed
4.3) Temperature
4.3.1) Exceeding of max. admissible cyl. head temperature
Cylinder head
temperature max.
4.3.2) Exceeding of max. admissible exhaust gas temperature
Exceeding ex-
haust gas temper-
ature max.
Page 4-2
January 01/2018
Non-compliance can result in serious injuries or death!
At unusual engine behaviour conduct checks as per following sec-
tion and according to the relevant section in the Maintenance
Starting procedure same as on ground, however, on a warm en-
gine without choke.
Reduce the engine speed. Any exceeding of the max. admissi-
ble engine speed has to be entered by the pilot into logbook,
stating duration and extent of over engine speed.
Reduce engine power setting to the minimum necessary and
carry out precautionary landing.
Any exceeding of the max. admissible cylinder head tempera-
ture has to be entered by the pilot into the logbook, stating dura-
tion and extent of over-temperature condition.
Any exceeding of the max. admissible exhaust gas temperature
must be entered by the pilot into the logbook, stating duration
and extent of excess-temperature condition.
BRP-Rotax
m WARNING
Manual.
ATTENTION
Effectivity: 582 UL
Edition 3 / Rev. 0