Rotax 582 UL series Operator's Manual page 33

Mixing procedure
Effectivity: 582 UL
Edition 3 / Rev. 0
Figure 1
Step Procedure
1 Use a clean approved container of known volume. To
help predilute the oil, pour a bit of fuel into the container.
2 Fill known amount of oil into container. Oil must be ap-
proved for air cooled engines at 50:1 mixing ratio. Agi-
tate slightly to dilute oil with gasoline.
3 Add gasoline to obtain desired mixture ratio (use fine
mesh screen).
4 Replace container cap and shake the container thor-
oughly. Then using a funnel with a fine mesh screen to
prevent the entry of water and foreign particles, transfer
mixture from container into the fuel tank.
Non-compliance can result in serious injuries or death!
At refueling use only metal containers and ground the aircraft in ac-
cordance with the grounding specifications to avoid electrostatic
BRP-Rotax
m WARNING
charging.
Page 2-5
January 01/2018