SECONDARY TRANSMISSION
Removal of the secondary transmission
Remove the screw (A) in order to drain
the relay box.
Tightening torque: 10 Nm.
Use a drip pan to catch the transfer box
oil when the cover is removed.
- Remove the secondary transmission cover
(7 screws).
Tightening torque: 22 Nm.
- Remove the paper gasket (1) and the
2 locating pins (2).
- Remove the countershaft (3).
- Remove the secondary shaft (4).
Make a note of the way the secondary
shaft pinion is installed.
- The primary shaft can be drifted out of the
casing using a mallet (5).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SECONDARY TRANSMISSION
A
2
4
5
1
2
3
17