Wlan Module Installation (Pwfmdd101) - LG B62AWYN9L6 Installation Manual

WLAN module installation (PWFMDD101)

1. Connect USB wire harness to USB connector. Beside the control box of the product.
2. Connect USB wire harness to WAN module
3. Install WLAN module proper location under ceiling and set AP mode to use App.
4. Refer to WLAN module and App installation manual. For detailed installation method.
Indoor PCB
Control box
Please check these out.
- Install WLAN module in a space open on all sides.
(Avoid installing it in a blind spot where the signal is weak or blocked.)
- Install the unit so that the LG logo in WLAN module face in the direction of Wi-Fi wireless
router installed.
- Avoid to install the WLAN module in a place blocked by the wall if possible.
USB connector
Control box cover
Ceiling
WLAN Module
USB wire harness
Roof
H=200 or more
Ceiling
ACCESSORY GUIDE
53