Connecting the cable to Outdoor Unit
Remove the side panel for wiring connection.
Use the cord clamp to fix the cord.
Earthing work
- Case 1 : Terminal block of Outdoor Unit have
Connect the cable of diameter 1.6mm
control box and do earthing.
- Case 2 : Terminal block of Outdoor Unit don't have
Connect the cable of diameter 1.6mm
and fasten with earth screw
!
CAUTION
• The circuit diagram is not subject to change without notice.
• Be sure to connect wires according to the wiring diagram.
• Connect the wires firmly, so that not to be pulled out easily.
• Connect the wires according to color codes by referring the wiring diagram.
• The Power cord connected to the unit should be selected according to the following speci-
fications.
mark.
2
or more to the earthing terminal provided in the
mark.
2
or more, to the panel of control box, marked as
* Make sure the rubber bushes are
Properly used in knock-out holes after
connecting main power cable.
WIRING
Connecting cable terminal
Power cord terminal
Cord clamp
Cord clamp
35