IBM 5595-1AX Installation And User Manual page 33

Submenu
ON/OFF settings Energy saving
(continued)
Sleep mode
Remote command
RPO delay
Available settings Default settings
[Enabled] [Disabled] [Disabled]
If Enabled, UPS will
shut down after 5
min. of back-up time,
if no load is detected
on the output.
[Enabled] [Disabled] [Disabled]
If Disabled, LCD and
communication will
turn OFF
immediately after
UPS is OFF.
If Enabled, LCD and
communication stays
ON 1h30 min. after
UPS is OFF.
[Enabled] [Disabled] [Enabled]
If Enabled, shutdown
or restart commands
from software are
authorized.
[0 s] [1s ] [2 s]...[180 [0 s]
s]
Delays remote power
off command
Chapter 2. Presentation
15