On-Screen Display Menu
Adjusts the picture to your preference with the
following picture settings.
The screen dims
For less contrast
For less color
For resetting all Picture adjustment items to the factory
preset values, press a / b to select "Reset", press ENTER,
press a / b to select "Yes", and then press ENTER.
Automatically adjusts the brightness of the screen.
On(Display): Displays the OPC effect on the screen while
adjusting the brightness of the screen.
On: Automatically adjusts.
Off: The brightness is ﬁ xed at the value set in "Backlight".
When set to "On", the Optical Picture Control (OPC) senses
the surrounding light and automatically adjusts the backlight
brightness. Make sure nothing obstructs the OPC sensor,
which could affect its ability to sense surrounding light.
When set to "On(Display)", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
When set to "On(Display)" or "On", the OPC indicator on the
TV lights green.
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
For resetting all adjustment items to the factory preset
values, press a / b to select "Reset", and then press
Color Temp. (Color Temperature)
For a better white balance, use color temperature
White with bluish tone
White with reddish tone
For more contrast
For more color
Automatically adjusts the image contrast according to
On: Automatically adjusts the image contrast.
Off: No adjustment.
Film Mode (3:2 pull-down)
Automatically detects a ﬁ lm-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still ﬁ lm frame for high-deﬁ nition picture
On: Detects, analyzes, converts ﬁ lm source.
Off: Normal viewing mode.
"Film Mode" is not selectable when channel display shows
an input resolution of 480p or 720p.
Digital Noise Reduction
Produces a clearer video image.
Off: No adjustment
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off: For Game Mode.
3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is