Watching A Dvd Image; Connecting A Dvd Player; Displaying A Dvd Image - Sharp Aquos LC 37HV4U Operation Manual

Using external equipment

Watching a DVD image

Connecting a DVD player

You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
AVC System
(rear view)
TV
POWER
AV
MODE
VIEW
MODE
DISPLAY
INPUT SOURCE
TV
PC
For INPUT1 signal
TV MENU
Option
Input Select
Auto
COMPONENT
AV-Y/C
42
AV cable
(commercially available)
S-video cable
(commercially available)
TV CBL VCR DVD
/SAT /LD
/DTV
ANT-A/B INPUT
FRONT
SURROUND
MTS CC
TWIN
PICTURE SELECT
SUB TWIN CH
FREEZE INPUT
SLEEP LEARN
EDIT/
INPUT1
INPUT2
INPUT3
INPUT4
Component video cable
(commercially available)

Displaying a DVD image

To watch a DVD image, select "INPUT1" from "INPUT
SOURCE" menu using INPUT on the remote control
unit or on the Display. (See page 50.)
Then select "INPUT1" on "Input Select" in the "Option"
menu to set the correct input signal type. (See page
50.)
The setting is stored and can be selected on the
"INPUT SOURCE" menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the "Input Select"
menu.
• Refer to your DVD player operation manual for the signal
type.
When using component
video cable, select
"COMPONENT" for
"Input Select" in the
menu.
DVD player