Using external equipment
Watching a DVD image
Connecting a DVD player
You can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment.
AVC System (rear view)
When using component
cable, select
"COMPONENT" for "Input
Select" in the menu.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
TV MENU
Option
Input Select
COMPONENT
Y/C
CVBS
RGB
(For INPUT3 signal)
SCART cable
(commercially available)
Component cable (commercially available)
To watch a DVD image, select "INPUT3" from "INPUT
SOURCE" menu using b on the remote control unit
or INPUT on the Display.
Then select "INPUT3" on "Input Select" in the menu to
set the correct input signal type. (See page 50.)
The setting is stored and can be selected in the "INPUT
SOURCE" menu.
• Each time b is pressed, the input source toggles.
• If the DVD image does not come in clearly, you may need
• Refer to your DVD player operation manual for the signal
Displaying a DVD image
NOTE
to change the input signal type setting on the "Input Select"
menu.
type.
DVD player
43