Power Control For Pc Source - Sharp Aquos LC 37HV4U Operation Manual

Basic adjustment settings

Power control for PC source

Power control setting allows you to save energy.
MENU
RETURN
SOURCE
POWER
A
POWER INPUT
Power save
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
3
Press a/b to select "Power Save", and then
press SET/ENTER.
PC MENU
Power control
Power Save
Power Management
4
Press c/d to select the desired backlight
brightness, and then press SET/ENTER.
PC MENU
Power control
Power Save
Manual [+4]
Auto
NOTE
• When setting to "Auto", the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
40
TV/SAT/DVD DTV/DVD TOP
MENU MENU
DTV/SAT
GUIDE
SET/
ENTER
DTV/SAT
INFO
VCR REC
FAVORITE CH
B C D
VOL VOL
RECEIVER
Setup
[Manual]
[Off]
–4 +4
Power management
When set, the power will automatically shut down.
1
Press MENU and the PC MENU screen
displays.
2
Press c/d to select "Power control".
3
Press a/b to select "Power Management",
and then press SET/ENTER.
PC MENU
Power control
Power Save
Power Management
4
Press a/b to select "Mode1" or "Mode2",
and then press SET/ENTER.
PC MENU
Power control
Power Management
Selected item
• No power management
Off
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
Mode1
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit. (See
page 21).
• If no signal inputs for 8 seconds, the power
shuts down.
Mode2
• When you start using the PC and the signal
inputs again, the System turns on.
Setup
[Manual]
[Off]
Off
Mode1
Mode2
Description