About Jump Starter; Getting Started; Connecting To The Battery - Motomaster Eliminator 011-1906-4 User's Product Manual

Jump starter and power bank
Table of Contents

Advertisement

Available languages

Available languages

12
model no. 011-1906-4 contact us 1.888.942.6686

•About Jump Starter:

The MotoMaster
jump starter
®
is a compact and portable lithium-ion jump starter for cars,
boats, motorcycles, ATVs, lawn mowers, RVs, tractors,
trucks and more. It's extremely safe for anyone to use.
It features spark proof technology and reverse polarity
jump starter can instantly
protection. The MotoMaster
®
jump start most single-battery applications, up to 20 times
on a single charge. The MotoMaster
jump starter is also
®
equipped with a USB battery pack and LED flashlight,
making it the ultimate emergency tool.

•Getting Started:

The jump starter comes partially
charged out of the box and needs to be fully charged
prior to use. Carefully read and understand the vehicle
owner's manual on specific precautions and recommended
methods for jump starting the vehicle. Make sure to
determine the voltage and chemistry of the battery by
referring to your battery owner's manual prior to using this
product. The MotoMaster
jump starter is for jump starting
®
12 V lead-acid batteries only.

•Connecting to the Battery:

Before connecting to the battery, verify that you have a
12 V lead-acid battery. The jump starter is not suitable for
any other type of battery. Identify the correct polarity of
the battery terminals on the battery. The positive battery
terminal is typically marked by these letters or symbol (POS,
P, +). The negative battery terminal is typically marked
by these letters or symbol (NEG, N, -). Do not make any
connections to the carburetor, fuel lines, or thin sheet metal
parts. The instructions below are for a negative ground
system (most common). If your vehicle is a positive ground
system (very uncommon), follow the instructions below in
reverse order.
1.) Connect the positive (red) HD battery clamp to the
positive (POS, P, +) battery terminal.
2.) Connect the negative (black) HD battery clamp to the
negative (NEG, N, -) battery terminal or vehicle chassis.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eliminator

Table of Contents