The Battery; Battery Charging - Motomaster Eliminator 011-1906-4 User's Product Manual

exceed 80oC under any condition.
•Compatibility:
12 V lead-acid batteries. Do not attempt to use product
with any other type of battery. Jump starting other
battery chemistries may result in injury, death or property
damage. Contact the battery manufacturer prior to
attempting to jump start the battery. Do not jump start a
battery if you are unsure of the battery's specific chemistry
or voltage.

•The Battery:

product should be replaced only by MotoMaster
and must be recycled or disposed of separately from
household waste. Do not attempt to replace the battery
yourself and do not handle a damaged or leaking lithium-
ion battery. Never dispose of battery in household trash.
Disposal of batteries in household trash is unlawful under
state and federal environmental laws and regulations.
Always take used batteries to your local battery recycling
center. If the product battery is excessively hot, emitting
an odor, deformed, cut, is experiencing or demonstrating
an abnormal occurrence, immediately stop all use and
contact MotoMaster

•Battery Charging:

included USB charge cable and a MotoMaster
12 V power adapter. A third-party USB cable and 5 W
or 10 W power adapter that are compatible with USB
2.0 or power adapters compliant with one or more of the
following standards EN 301489-34, IEC 62684, YD/T
1591-2009, CNS 15285, ITUL.1000 may be used. Be
cautious of using low quality power adaptors, as they may
present a serious electrical risk that can result in injury to
person, device, and property. If using a third party USB
power adapter, contact the manufacturer(s) to find out if
your power adapter complies with the above standards.
Using damaged cables or chargers, or charging when
The product is only compatible with
The built-in lithium-ion battery in the
.
®
Charge the product with the
,
®
10 W
®
7