BKI BLF-F Service Manual page 26

Electric Auto-Lift Fryer
STEP
1 On the FILTER/OFF/FRY
switch, touch the FRY button.
2 Press PROG on the keypad.
3 Input 1724 and press ENTER.
4 Select the program product
number (1-8).
5 Press ENTER.
6 Press TOGGLE/CLEAR and
input the number of minutes you
want to cook.
7 Press ENTER.
8 Press TOGGLE/CLEAR and
input the cooking temperature
for product to be cooked.
9 Press ENTER.
10 Press TOGGLE/CLEAR until the
desired option is displayed.
11 Press ENTER.
Table 2. Product Programming Procedure
ACTION DISPLAY
LOW
PROGRAM CODE
PROGRAM PRODUCT #
PROGRAM PRODUCT X
PROGRAM TIME1
00:00
PROGRAM TIME1
XX:XX
PROGRAM TEMP1
000 F
PROGRAM TEMP1
XXX F
PROGRAM TEMPCOM1
FLEX TIME
PROGRAM TEMPCOM1
PROGRAM VALVE1
CLOSED
23
Operation
COMMENTS
X refers to the program
number you selected.
This command allows you
to specify the cooking time
for this stage. The time
displayed may be a
previously programmed
value.
XX:XX refers to the
number of minutes you
input.
This command allows you
to specify the cooking
temperature for this stage.
The temperature
displayed may be a
previously programmed
temperature. The
temperature scale may
also display C depending
on the system option that
is set.
XXX refers to the cooking
temperature you input.
This command enables
you to select whether or
not time is allowed for the
fryer to recover from
temperature loss while
cooking during this stage.
The FLEX TIME option
will allow the fryer to
recover from temperature
loss.
X refers to the
X temperature
compensation option
selected.
This command allows you
to specify whether the
solenoid valve will be
open or closed during this
stage.