Specifi Cations - Optex THERMO-HUNTER BUILT-IN Instruction Manual

Specifi cations
Model
Temperature range
Area size
Optics
Detection element /
Wavelength
Response speed
Accuracy
Repeatability
Emissivity rate
adjustment
Power supply
Consumption
Ambient temperature
Ambient humidity
Storage temperature
Water resistance
Vibration resistance
Material
Dimensions
Weight
Display
Resolution
Analog output
Analog output resolution
Analog output accuracy
Analog output updating time
Analog output allowable load
Analog output impedance
Contact output
Contact output capacity
Interface
Others
Accessories: Mounting nut (M12 × P1.0) × 2
Options: Black body tape, mounting fi tting, amplifi er protective case, changeable laser marker, air purge
collar, CF lens
* The specifi cations are subject to change without notice for product improvement.
4
CS-30TAC-HT
0 °C to 1000 °C
φ 30/500 mm
22:1
Silicon lens(Water-repellent coat, Oil-repellent coat)
0 to 200 C: ± 2
°
201 to 1000 C: Reading value ± 1 %
°
120 mA (Max. load), 80 mA (Eco mode)
Sensor head: 0 to 180°C, Amplifi er: 0 to 65°C Sensor head: 0 to 100°C, Amplifi er: 0 to 65°C
10 to 55 Hz, 1.5 mm amplitude, 2 hours each for XYZ directions
Sensor head: M12 ( φ 14) x 34 mm, Amplifi er: 35 x 52 x 38.5 mm
Sensor head: Approx. 100 g (including a cable of 3 m),
Amplifi er: Approx. 200 g (including a cable of 2 m)
CS-40TAC-HT
φ 40/500 mm
15:1
Thermopile/ 8 to 14 μm
150 msec/90 ％
C
°
201 to 500
Up to 200 C: ± 1.0
°
201 C and more ： ± 0.5 %
°
0.1 to 1.2
12 to 24 VDC ± 10 %
35 to 85 % (without condensation)
0 to 70
°
Sensor head: IP69K, Amplifi er: IP40
Sensor head: SUS, Amplifi er: ABS
LED
1°C
4 to 20 mA
0.5°C
± 0.5% or ± 1.0°C
10msec
250 Ω
47 Ω
Photo MOS FET x 2 (c contact x 2)
300 mA/ 30 VDC or less
Digital output
Trigger (synchronous) input
Bank switch x 4
CS-30TAC
-40 °C to 500 °C
φ 30/500 mm
22:1
-40 to 0 C: ± 3
°
1 to 200 C: ± 2
°
C: Reading value ± 1 %
°
C
°
C
CS-40TAC
φ 40/500 mm
15:1
C
°
C
°