Trig Mode; You Can Specify The Type Of Trigger Input As A Switch To Execute Output - Optex THERMO-HUNTER BUILT-IN Instruction Manual

Setup of Functions
TRIG
● ：
TRIG/ Trigger (synchronous) input mode
TRIG
NoN
TRIG
NoN
NON
MAX HOLD
OFF
Trigger input
ON
MAX
MIN
P-P HOLD
OFF
Trigger input
ON
MAX
MIN
18
You can select the output control at the time of trigger (synchronous) input.
NONE: No setting
EXT: External trigger input
WAVE: WAVE trigger input
* Output is controlled by setting the specifi ed temperature as the judgment
criterion value (WAVE LIMIT).
Output setting
MAX: The maximum value between the synchronous input points is output.
MIN: The minimum value between the synchronous input points is output.
P-P: The difference between the maximum and minimum values between
the synchronous input points is output. (For EXT only)
SAMP: The value at the moment of synchronous input is output. (For EXT only)
TRIG
EXT
EXT
HOLD HOLD
MAX
MAX
Analog output
Measurement
value
Analog output
Measurement
value
TRIG
WAVE
WAVE
HOLD
MIN P-P
MIN P-P
MIN HOLD
OFF
Trigger input
MAX
MIN
SAMPLE HOLD
OFF
Trigger input
MAX
MIN
HOLD
SAMP
SAMP
ON
ON
Measurement
value
Analog output
Measurement
value
Analog output