Optex THERMO-HUNTER BUILT-IN Instruction Manual page 19

EXT
○ ：
EXT/ External Trigger mode
TRIG
EXT
HOLD
MAX
WAVE
○ ：
WAVE/ Wave Trigger mode
TRIG
WAVE
HOLD
MAX
HOLD
MIN
WAVE MAX HOLD
OFF
Trigger input
ON
MAX
WAVE
LIMIT
MIN
* After the power is turned on and before the fi rst trigger is input, the minimum value (4 mA) is output in
the MAX, P-P and SAMPLE settings and the maximum value (20 mA) in the MIN setting.
Sampling starts at the fi rst trigger input, and the analog output control starts from the second trigger
input.
* If the alarm output has been set, the judgment criterion will be the analog output controlled by the
trigger input setting. -> Page 20
(1) In the TRIG mode, select EXT and press the ENTER button to confi rm the
setting.
(2) Select the analog output at the time of trigger input.
(3) Press the ENTER button to confi rm the setting.
HOLD
MIN
(1) In the TRIG mode, select WAVE and press the ENTER button to confi rm
the setting.
(2) Select the analog output at the time of WAVE trigger input.
(3) Input the WLIT/WAVE LIMIT value.
(4) Press the ENTER button to confi rm the setting.
* In the WAVE mode, the selectable output setting is MAX or MIN only.
WIMT
200
WIMT
200
Analog output
Measurement value
HOLD
P-P
WLIM
150
WLIM
150
WAVE MIN HOLD
OFF
Trigger input
ON
MAX
WAVE
LIMIT
MIN
HOLD
SAMP
Measurement value
Analog output
19