Ascl Mode; Ascl; You Can Specify A Desired Measurement Width For Analog Output - Optex THERMO-HUNTER BUILT-IN Instruction Manual

Temperature
250
100

ASCL

● ：
ASCL/ Analog Scale mode
ASCL
-40
H
500
-40
Temperature
500℃
‑40℃
4mA 20mA
* The minimum temperature width for upper limit value and lower limit
value is 10 degree.
Temperature
Energy
You can change the temperature range of analog
ASCL
output (4 - 20 mA) within the measurement
temperature range.
500
H (upper limit value): Value for 20 mA output
L (lower limit value): Value for 4 mA output
* The value of sub indication displayed fi rst is the
H
300
L
L
0
Temperature
300℃
0℃
Output 4mA
* The minimum width of output range is 100°C. You cannot set it to less
than 100 °C.
0 to 1000 °C: 4 – 20 mA -> 100 to 200 °C: 4 – 20 mA ○
300
250
120
100
current Setting value.
(1) In the ASCL mode, press the ENTER button to
make the setting.
(2) H (upper limit value) is displayed.
Change the value and press the ENTER button to
confi rm the setting.
(3) L (lower limit value) is displayed.
Change the value and press the ENTER button to
confi rm the setting.
20mA Output
-> 100 to 180 °C: 4 – 20 mA ×
After adjustment
Energy
15