Storing Numbers For Automatic Dialing - Sharp FO-DC550 Facsimile Operation Manual

INITIAL SETTINGS

STORING NUMBERS FOR AUTOMATIC DIALING

Automatic Dialing is a quick and convenient way to dial by using only a Rapid key (Rapid Key Dialing), or pressing
the [SPEED/SEARCH] key and select the SPEED and entering a two digit number (Speed Dialing).
To use Automatic Dialing, you must first store the full number. The way you store it depends on whether you want to
use it for Rapid Key Dialing or Speed Dialing:
Storing numbers
Use the following procedure to store numbers for Rapid Key Dialing or Speed Dialing:
1
Press the [MENU] key.
2
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
Selection
"2:ENTRY MODE"
3
Press the [ ] key (
until "1:FAX NUMBER" appears, and
then press the [ENTER] key.
Selection
"1:FAX NUMBER"
4
Press the [ ] key (
to select the type of auto-dial number
that you wish to program and then
press the [ENTER] key.
5
Press the [ ] key (
to select "1:SET" and then press the
[ENTER] key.
Selection
"1:SET"
42
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
To program a Rapid Key,
select "1:RAPID KEY".
To program a Speed Dial
number, select
"2:SPEED #".
) or [ ] key ( )
6
Press the Rapid Key or enter the
Speed Dial number that you wish to
program.
01 02 03 04 05
10 11 12 13 14
06 07 08 09
15 16 17 18 SHIFT
7
Enter the fax number with the numeric
keys.
8
Press the [ENTER] key.
To program a Rapid Key,
press a Rapid key ("01"
to "18").
To program a Speed Dial
number, press two
numeric keys ("00" to
"99") and then press the
[ENTER] key.
Enter the fax number
(maximum of 40 digits
including pauses) using
the numeric keys.