Sharp FO-DC550 Facsimile Operation Manual page 13

Menu item
25 : PRINT PASSCODE
26 : 2-SIDED RX
27 : TRAY SELECTION
(When the 250-sheet paper
feed unit is installed.)
5 :ANTI JUNK FAX
1 : ANTI JUNK SELECT
2 : JUNK FAX #
6 : A.M. MODE
1 : QUIET DETECT TIME
2 : AUTO RECEIVE
7 : MEMORY POLL MODE
1 : 1 TIME
2 : REPEAT
8 : POLLING MODE
9 : SERIAL POLL MODE
Settings (factory default setting appears in bold)
This setting is used to program the passcode that is required
when "24 : PRINT HOLD MODE" is enabled. When printing
received faxes with "0 : HOLD DATA PRINT", you will be
prompted to enter the passcode that is programmed here.
1 : SET
2 : CLEAR
Print on both sides of the paper when a multi-page fax is
received.
1 : ON
2 : OFF
Set the tray for printing received faxes.
1 : AUTO
2 : TRAY 1
3 : TRAY 2
Enable the anti junk function to block fax reception from
specified fax numbers.
1 : ON
2 : OFF
Program (or delete) fax numbers from which fax reception is to
be blocked.
1 : SET
2 : CLEAR
Activate fax reception when a period of silence longer than the
set time is detected.
00 - 10 (05)
Enable fax reception when the answering machine is full and
cannot receive messages or otherwise fails.
1 : ON
2 : OFF
Perform polling transmission once.
Perform polling transmission repeatedly.
Poll another fax machine.
Sequentially poll multiple fax machines.
Page
68
64
30
81
82
48
49
75
75
73
74
9