Table of Contents
Advertisement
7
22
[LIST] key
15
Press this key to select from a list of available
reports.
[SPEAKER] key
16
Press this key to begin manual dialing. (To close
the line, press the [SPEAKER] key again.)
[2-SIDED TX] key
17
Press this key to fax a two-sided original.
[MODE SELECT] key / Mode indicators
18
Press this key to select the mode. The indicator of
the selected mode lights (copy, printer, scanner,
fax mode indicators).
RSPF indicator
19
This lights up when an original is placed in the
RSPF.
Error indicator
20
This lights steadily or blinks when a paper misfeed
or other error occurs.
Tray location indicator
21
Indicates the selected paper tray. The indicator
blinks when the tray is out of paper or is not
closed.
[MENU] key
22
Press this key to configure a user program.
23
24
25
26
9
8
27
28
[
] key (
), [
] key (
23
Press the [
] key (
select an item in a function setting menu.
Press the [ENTER] key to enter a selection.
[ ] key
24
Press this key to enter symbols during a name
storing procedure.
Press the " " key to change from pulse dialing to
tone dialing mode.
Numeric keys
25
Press these keys to dial numbers, and enter
numbers and letters during number/name storing
procedures.
[#] key
26
Press this key to enter symbols during a name
storing procedure. The [#] key scrolls through
symbols in the opposite direction of the [ ] key.
When dialing, press this key after you are finished
scanning originals into memory from the document
glass.
[START] key (
)/ indicator
27
Used for the following:
• To begin sending a fax.
• Reading an original into memory from the
document glass.
• Manually receiving a fax.
• Entering and setting information.
• Printing received faxes held in print hold mode.
Power save indicator
28
This lights up when the power save function is
activated.
INITIAL SETTINGS
), [ENTER] key
) or [
] key (
) to
15
2
Advertisement
Table of Contents
Troubleshooting
