Channel Setting; Getting Channels Automatically - Sharp DV-RW550U Operation Manual

Getting channels automatically

Right after the purchase of the
unit and whenever you move to a
new area, we recommend available
channels in your area be stored
using "Auto Preset" in the
Channel Preset of the setting
menu.
1
Press POWER to turn on the
unit.
2
Turn on the TV and be sure to
select the input to which the
unit is connected.
3
Press SETUP.
Easy Setting Menu or Advanced
Setting Menu will appear.
Advanced Setting Menu
Playback
Recording
Display
Select Video
Clock
Channel
Disc
Easy Setting Menu
Getting started

Channel setting

4
Select "Channel" using
Cursor K / L, then press
ENTER.
Channel menu will appear.
Screen for Advanced Setting Menu:
Channel
Auto Preset
Manual Preset
TV Audio Select Stereo
5
Select "Auto Preset" using
Cursor K / L, then press
ENTER.
The unit will start getting chan-
nels available in your area.
Auto Presetting Now
Wait for several minutes to finish
channel scanning.
6
Press SETUP to exit.
•You can select only the channels
memorized in this unit by using
CHANNEL K / L on the front
panel or CH K / L on the
remote control.
1
4
5
VCR DVD
To select a channel
You can select a channel by
directly entering channel num-
ber using the Number but-
tons on the remote control.
Notes for using the
Number buttons:
•When selecting cable chan-
nels which are larger than 99,
enter channel numbers as a
three-digit number (For
example: 117, press 1, 1, 7).
•You must precede single-digit
CH 1
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
•You can select the line input
mode ("L1" or "L2"). To
select, press 0, 0, 1.To select
"L2", press 0, 0, 2. Details are
on page 41.
Note
•You cannot change the channel
when one of the components
of the unit (VCR or DVD) is in
the recording, OTR or Timer
Recording mode.
•If the auto presetting is can-
celed during presetting, some
of the channels not yet preset
may not be received.
•The selection will depend on
how you receive the TV chan-
nels.
To cancel the auto preset-
ting during scanning:
Press RETURN
SETUP to cancel.
6
3
6
or
19