Settings For An External Source; Connection To An External Source - Sharp DV-RW550U Operation Manual

Vcr/dvd recorder combination

Hide thumbs Also See for DV-RW550U:

Service manual (147 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

Table of Contents

Connection to an external source

Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).

When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE1 (Rear)

or LINE2 (Front).

Use commercially available S-Video or Video cable and an Audio cable for this type of connection.

S- VIDEO

S-Video

Video

cable

To LINE 2 IN

STOP/EJECT

PLAY

POWER

REW F.FWD

REC/OTR

1. Press SETUP.

Easy Setting Menu or Advanced Setting Menu will

appear. If Advanced Setting Menu is displayed, pro-

ceed to STEP 3.

2. Select "Advanced Setting Menu" using

Cursor K / L, then press ENTER.

Advanced Setting Menu will appear.

3. Select "Select Video" using

Cursor K / L, then press ENTER.

Select Video menu will appear.

Select Video

L1 ( Rear )

L2 ( Front )

4. Select "L2 (Front)" using Cursor K / L, then

press ENTER.

L2 ( Front )

Video In

S-Video In

5. Select the input jack type to connect using

Cursor K / L, then press ENTER.

If you want to use S-VIDEO INPUT, select "S-Video

In". If you want to use VIDEO INPUT (Composite),

select "Video In".

Select Video

L1 (Rear)

L2 (Front)

Recording