Rf Converter Output - Sharp DV-RW550U Operation Manual

Error message
Recording Error
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
Recording Error
You cannot record on this disc
as Control Information is full.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Recording Error
This disc is already finalized.
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error
description, and call a SHARP Authorized Service Center for inspection. (See Service Information on page 104.)
You can watch the TV programs with
the tuner of the unit. (Usually channel
3 or 4 of the TV is available for the
RF converter setting.) Be sure to con-
nect the unit to a TV using the Round
Coaxial cable. Refer to page 14.
1
Select channel 3 on your TV.
2
Press VIDEO/TV on the
remote control.
• If noise appears, change the RF
output channel of the unit to CH
4 by pressing VIDEO/TV for 3
seconds.The RF output channel
will alternate between CH3 and
CH4 as follows.
Others
Troubleshooting (cont'd)
Cause
You are trying to record on the
disc on which the number of
recording titles already reached the
maximum (99).
You are trying to record on the
VR mode DVD-RW disc on which
the number of recording chapters
already reached the maximum (999).
This disc has no space to write
the Control Information when
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may become full even if the
recording area still has enough space.
When recordings are performed
repeatedly on an unstable disc,
this area may become full.
Every time you insert a disc for
recording, the disc's working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able
to record full 99 titles.
You are trying to record on
the disc already finalized.

RF converter output

for more than
3 seconds
3 seconds
( RF ON ) CH4
3 seconds
( RF ON ) CH3
3 seconds
( RF ON )
CH4
3 seconds
• Every time the RF output channel
is changed, CH3 or CH4 will
appear on the front panel display.
Solution
Delete unnecessary titles
(pages 65, 69).
This unit cannot delete the original
chapter. Delete unnecessary chapter
marker using other DVD recorders.
Delete unnecessary titles from the
Original
(page 69).
Delete unnecessary titles
(pages 65, 69).
Insert a new disc.
Undo finalizing of the disc
(page 44).
VCR/DVD RECORDER
COMBINATION
2
101