Timer Recording With Vcr Plus+ System - Sharp DV-SR3U Operation Manual

Timer Recording with
®
VCR Plus+ System
DVD-RW DVD-RW
DVD-R
VR MODE VIDEO MODE
• The VCR Plus+ ® System allows you to
program your Recorder for timer recording
simply by inputting the PlusCode number.
• The PlusCode numbers are listed in most
newspapers, television guides, and local
CATV listings. Simply by inputting this
PlusCode number, you can program your
Recorder for timer recording, eliminating
the need to input program start time, stop
time, channel, date and other information
usually necessary for timer recording.
• Up to 8 timer programs can be stored.
(This includes Easy Recording Guide and
Timer Program.)
Preparation to Use VCR Plus+ System
1 Check that the clock is displaying the
correct time.
2 Preset the channels.
3 When you record SAP broadcast, set
"SAP SETTING" to "ON" (see page 76).
4 When recording from an external
equipment such as a CATV box or
satellite receiver, turn on the power of the
external equipment.
Important!
• When setting the timer recording, make
sure recordable disc is loaded.
1
Press VCR PLUS+ (button) to
display the VCR Plus+ Setting
screen.
• If you press VCR PLUS+ (button)
when the clock has not been set, the
"CLOCK SETTING" screen will
appear.
2
Press Number buttons to enter
the PlusCode number.
VCR Plus+ system
PRESS NUM KEYS TO ENTER PlusCode No.
1 2 3 4 5 – –
SET ERASE
• Press ERASE if you make a mistake
in the Plus Code number. Or Press \ \ \ \ \ /
| | | | | to select "ERASE", then press SET/
ENTER. Each time you press the
button, one digit will be erased.
• Press VCR PLUS+ (button) to cancel
the entire number.
3
Press \ / | to select "SET", then
press SET/ENTER.
• The timer recording details such as
date, start time, end time and channel
will be displayed.
4
Press \ / | to select "REC.
MODE", then press SET/ENTER.
• When recording a program on a
• Press \ \ \ \ \ / | | | | | to select the item you
• If you complete timer recording
5
Press ' / " to select the record-
ing mode, then press SET/
ENTER.
TIMER PROGRAM
12/26 SUN 9:30 PM ~ 10:00 PM CH 1
• If there is not enough empty space
When "MANUAL SETTING (MN)" is
selected:
• Select recording mode with \ \ \ \ \ / | | | | | , then
press SET/ENTER. (The recording mode
can be selected from 32 levels.)
6
Confirm the setting of timer
program, press \ to select
1 / 2 5 2 SAT 1 : 0 8 2 AM
"COMPLETE", then press SET/
ENTER.
– –
• "TIMER PROGRAM LIST" screen is
• The TIMER indicator on the front of
Timer Recording
channel for the first time, be sure to
enter the correct channel number in
this step, otherwise the PlusCode
number will not be successfully
decoded.
COMPLETE REC. MODE
n
SELECT ENTER RETURN
ENTER
DAILY WEEKLY ONCE
want to correct such as the start/stop
time, then press ' ' ' ' ' / " " " " " to correct.
(For details refer to page 40.)
setting less than 3 minutes before it
starts, timer recording start time
column will stay as selected. Reset
the timer recording start time at least
3 minutes after the present time.
1 / 2 5 2 SAT 1
SELECT THE RECORDING MODE
FINE HIGH QUALITY ( Mbps)
* *
SP ( Mbps)
STANDARD
* *
( Mbps)
LP 2X
* *
( Mbps)
EP 3X
* *
ABLE TO MANUALLY SELECT
MANUAL SETTING (MN)
1 OF 32 LEVELS.
REMAIN TIME: FINE 0h47m
(time), a message is displayed.
Select the recording mode again.
COMPLETE REC. MODE
n
SELECT ENTER RETURN
ENTER
DAILY WEEKLY ONCE
displayed.
the Recorder lights up and timer
programming is completed.
Continued on Next Page |||
: 0 8 2 AM
39