Timer Recording; Timer Recording With G; Code ® System - Sharp DV-HR300X Operation Manual

Timer Recording

Timer Recording with
®
G- system
CODE
DVD-RW DVD-RW
HDD DVD-R
VR MODE VIDEO MODE
The operation method is the same for both
HDD and DVD.
®
• The G- system allows you to programme
CODE
your Recorder for timer recording simply by
inputting the G- number.
CODE
• The G- numbers are listed in most
CODE
newspapers, television guides, and local
CATV listings. Simply by inputting this
G- number, you can program your
CODE
Recorder for timer recording, eliminating the
need to input programme start time, stop
time, channel, date and other information
usually necessary for timer recording.
• Up to 16 timer programs can be stored.
(This includes Timer Program.)
Preparation to Use G-
CODE
• Check that the clock is displaying the
correct time.
• If the TIMER indicator on the front of the
Recorder is lit, press TIMER ON/OFF to
turn off the TIMER indicator and to set the
TIMER STANDBY mode to off.
1
Press G- (button) to display
CODE
the "G- " setting screen.
CODE
EM
G - COD E S Y S T
©
G - COD E NO .
ONC E WE E K L Y
: S E L E C T 0
: E N T E R
2
Press Number buttons to enter
the G- number.
CODE
• Press ERASE if you make a mistake
in the G- number. Each time you
CODE
press the button, one digit will be
erased.
3
Press " , then use \ / | to select
"ONCE", "WEEKLY" or "DAILY".
• If you want to make additional
recordings at the same time each day
or week, select "DAILY" or "WEEKLY"
as appropriate.
4
Press SET/ENTER to confirm.
DA T E P R S T A R T S
2 5 / 1 2W- - 1 2 : 3 5
- - / - - - - - : --
- - / - - - - - : - -
- - / - - - - - : - -
P R : P R E S E T
: S E L E C T
: E N T E R
• "ERROR" will appear if you have entered a
number that is not a correct G-
number. If this happens press ERASE to
delete the numbers as required and enter
the correct G-
• Check that the menu list agrees with the
times shown in the TV listing. If it does not,
press ERASE to return to the G-
system menu, then enter the correct G-
number.
The first time that you use the G-
system to make a recording on each
channel preset, "PR" may be highlighted
on the On-Screen Display.
5
system
6
7
-
D A I L Y
9
: I N P U T
: R E T URN
8
1 / 4
T OP
1 3 : 0 5 F H
- : - - - -
- : - - - -
- : - - - -
: CH A NGE
: R E T URN
NOTE
number.
CODE
Enter the channel button you want
to record using ' / " or Number
buttons.
• For Example to record a programme
on channel 8 press 0 8.
Press \ / | to select "START
(time)" / "STOP (time)" then use
' / " or the Number buttons to
change the time if necessary.
• When entering less than 10 hours or
minutes add a "0" before the number, for
example for 12:05 start, press 1 2 0 5.
Press | to select "REC. MODE",
then use \ / | to select the
recording mode.
©
R E C . MOD E
F : F I N E S : S P L : L P E : E P
3 2 ) © 1 6
M : MA NU A L ( 1
R E C . ME D I A
H : H DD D : D V D
: S E L E C T
: E N T E R
When "M:MANUAL (1~32)" is
selected:
• Select the recording mode with \ \ \ \ \ /| | | | | ,
then press SET/ENTER. (The
recording mode can be selected from
32 levels.)
Press ' / " to select "REC.
MEDIA", then use \ / | to select
the recording disc ("H:HDD" or
"D:DVD").
CODE
CODE
CODE
CODE
: CH A NGE
: R E T URN
39