Sharp DV-SR3U Operation Manual page 38

Timer Recording
38
6
Press \ / | to select "REC.
MODE", then press SET/ENTER.
COMPLETE
SELECT ENTER
ENTER
DAILY WEEKLY ONCE
• Press \ \ \ \ \ / | | | | | to select the item you
want to correct such as the start/stop
time, then press ' ' ' ' ' / " " " to correct. " "
(For details refer to page 40.)
• If you complete timer recording
setting less than 3 minutes before it
starts, timer recording start time
column will stay as selected. Reset
the timer recording start time at least
3 minutes after the present time.
7
Press ' / " to select the record-
ing mode, then press SET/
ENTER.
TIMER PROGRAM
12/25 SAT 10:45 AM ~ 11:30 AM CH 33
SELECT THE RECORDING MODE
FINE HIGH QUALITY
SP STANDARD
LP 2X
EP 3X
ABLE TO MANUALLY SELECT
MANUAL SETTING (MN)
1 OF 32 LEVELS.
• If there is not enough empty space
(time), a message is displayed.
Select the recording mode again.
When "MANUAL SETTING (MN)" is
selected:
• Select the recording mode with \ \ \ \ \ / | | | | | , then
press SET/ENTER. (The recording mode
can be selected from 32 levels.)
8
Confirm the setting of timer
program, press \ to select
"COMPLETE", then press SET/
ENTER.
COMPLETE
SELECT ENTER
ENTER
DAILY WEEKLY ONCE
• "TIMER PROGRAM LIST" screen is
displayed.
• The TIMER indicator on the front of
the Recorder lights up and timer
programming is completed.
9
Confirm the programs on the list
and then press SET/ENTER.
• The "TIMER PROGRAM/CHECK"
REC. MODE
n
RETURN
10
Press START MENU or EXIT to
complete EASY REC. GUIDE timer
setting.
• Timer recording will function even
NOTE
• Timer recording will not start during disc
playback.
• When the power is off while recording timer
is set, front display panel will light up once
timer recording starts. If you want to turn off
the light, set "LCD BACKLIGHT REC."
(page 82) to "YES".
1 / 2 5 2 SAT 1 : 0 8 2 AM
You can also turn off the light by pressing
BACK LIGHT on the remote control (under
the cover) for more than 2 seconds.
Convenient Functions When Recording
Exact Recording (page 76)
• If you set EXACT RECORDING to "YES",
the Recorder will automatically adjust the
recording mode of timer recording so the
recorded programs will fit into one disc.
To check, change or cancel
timer settings
• See page 43.
To stop recording while
timer recording is in
progress
• If you press ■STOP, "TIMER RECORD-
ING IS IN PROGRESS. IF YOU PRESS
THE STOP BUTTON ONCE MORE, TIMER
RECORDING CANCELS AND RECORD-
REC. MODE
ING STOPS." will appear on the screen.
n Even that message goes out of the
RETURN
screen, pressing ■STOP one more time
will stop the recording.
screen is displayed. If you continue
timer programming using Easy
Recording Guide, repeat from step 2 .
after you turn the power off.