Switching Audio - Sharp DV-SR3U Operation Manual

Repeat Playback of a Title
or Chapter (Repeat Play-
back)
1
Play back the title or chapter you
want to repeat.
2
Press (INPUT).
3
Press \ / | to select the type of
Repeat Playback.
• TITLE: Repeats the title currently
playing back.
• CHAPTER: Repeats the chapter
currently playing back.
• A-B: Repeats the specified scene of
title or chapter.
SELECT TYPE OF REPEAT PLAYBACK.
TITLE CHAPTER
\ | SELECT
ENTER ENTER
• Press RETURN to cancel without
setting the type of Repeat Playback.
4
Press SET/ENTER.
Example: Repeat playback of a title
(TITLE).
TITLE REPEAT
5
Press (INPUT) to return to
normal playback.
A-B Repeat Playback (Re-
peat Playback of a Speci-
fied Part)
1
Press (INPUT) during
playback.
2
Press \ / | to select "A-B", then
press SET/ENTER.
3
Press SET/ENTER when you
reach the scene you want to start
Repeat Playback.
• The start point of the part (A) will be
memorized.
SELECT TYPE OF REPEAT PLAYBACK.
TITLE CHAPTER
ENTER SET REPEAT START POINT
4
Press SET/ENTER when you
reach the scene you want to end
Repeat Playback.
• The end point of the part (B) will be
memorized and the Repeat Playback
for the specified part (A-B) starts.
5
Press (INPUT) to return to
normal playback.
Function Control
You can do things like specify a title or chapter,
and adjust settings for video and audio if you
press FUNCTION (under the cover) during
playback. (For details see page 56.)

Switching Audio

You can change the audio output channel
using the AUDIO button (under the cover).
Each time AUDIO is pressed, the
audio channels change as follows:
AUDIO CD
L+R
DVD VIDEO
The sound number which is currently
A-B
played back will be displayed.
DVD-RW
VR MODE
The sound you can select varies depending
on the sound recorded on the disc. (page
77)
• When recording SAP broadcast or stereo,
the way audio channel changes may differ
depending on the recorded sound. See the
table of SAP on page 77 for details.
NOTE
• When you play a program recorded in dual
mono, and if you are listening to the Dolby
Digital sound via the digital output jack,
you cannot select the audio channel. Set
"DIGITAL AUDIO OUTPUT" to "PCM" (see
page 80), or if you want to change the
audio channel, listen via the analog output
jacks.
A-B
SET START PT
DVD/CD Playback
VIDEO CD
L R
DVD-RW DVD-R
VIDEO MODE
51