Sharp DV-SR3U Operation Manual page 61

Sharp dv-sr3u dvd recorder operation manual
Table of Contents

Advertisement

9
Press Red (B) (CONFIRMING) to
confirm the contents.
• The title is played back without the
scene to be erased.
Press Yellow (D) (ERASE) to
erase.
• Go to step 10 .
• Press RETURN to cancel scene
erase.
10
Press \ to select "YES", then
press SET/ENTER.
EDIT(ORIGINAL)
TITLE: CH33 FINE
TITLE INFO: 10/4 MON 8:09 PM – 8:14 PM
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
ERASE THIS SCENE?
DIVIDE CHAPTER
YES
SELECT
ENTER
ENTER
• Erase begins.
When erase completes, the screen in
step 5 appears.
• If "C (UNDO)" is displayed, you can
undo edit by pressing Green (C).
• To quit scene erase, press RETURN.
Then the edit screen appears.
11
Press EXIT to exit from Edit
mode.
NOTE
Selecting start and end points for scene
erase
You cannot set a range shorter than 3
seconds.
• Once you erase a section of an original, it
is completely erased. It cannot be restored,
so be very careful and confirm before
erasing.
• Scenes can only be added and erased a
maximum of 50 times per title.
• If scenes have been added 51 or more
times to a disc using another DVD recorder,
Editing (Recording) may not function.
Editing an Original Title
Searching for the Start
Point and End Point Scenes
The following playback operations are
available when searching for the start point
and end point scenes.
Playback
• If you press | | | | | PLAY, the currently paused
title will be played back.
Skipping to the start of a chapter
• If the scene to be selected is in another title
or chapter, first search for the title or
1
/ 2
5 2
SAT 1
: 0
8 2
AM
chapter using
Searching for scenes in a chapter
G
REV and
searching for a scene in a chapter.
Pause
• When you reach a scene near the start
NO
point or end point, press
to pause. This will make it easier to find the
n
RETURN
scene. The start and end points may shift
slightly.
Frame Advance/Reverse
• If you press
will start Frame Advance Playback. If you
press
Playback.
Final selection of scene
• To select a scene more accurately, use
slow playback starting a little before the
scene to be selected. This will keep you
from going beyond the scene.
If you press
can select a scene at your leisure during
slow playback of the video.
K
L
or
.
J
FWD are convenient for
F
STILL/PAUSE
L
after pause, the video
K
, it will start Frame Reverse
SLOW after pausing, you
Continued on Next Page |||
61

Advertisement

Table of Contents
loading

Table of Contents