Sharp DV-SR3U Operation Manual page 70

Editing a Play List
70
5
Adding a Title or Chap-
ter
1 1 1 1 1 Select "ADD CHAPTER/TITLE",
then press SET/ENTER.
2 2 2 2 2 Select a title (chapter) at the
title (chapter) list, then press
SET/ENTER.
Go to step 9 .
Specifying and Adding a
Scene
• Select "SPECIFY SCENE TO
ADD", then press SET/ENTER.
Go to step 6 .
EDIT(PLAYLIST)
TITLE: CH33 FINE
TITLE INFO: 10/4 MON 8:09 PM – 8:14 PM
ERASE SCENE
CHANGE TITLE NAME
ADD CHAPTER/TITLE
CHANGE THUMBNAIL
SELECT ORIGINAL TITLE/CHAPTER AND ADD IT
DIVIDE CHAPTER
ADD SCENE
MOVE TITLE
SPECIFY SCENE TO ADD
SELECT A SCENE FROM ORIGINAL VIDEO AND
ADD IT
n
SELECT ENTER ENTER
6
Press ' / " / \ / | to select title
(chapter) to edit, then press SET/
ENTER.
• The selected title (chapter) pauses.
EDIT(ORIGINAL)
TITLE: CH33 FINE
TITLE INFO: 10/4 MON 8:09 PM – 8:14 PM
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
ADD SCENE
MOVE TITLE
PLAYBACK SET START POINT
PLAY ENTER
7
1 1 1 1 1 Press |PLAY to start playback.
• Find the scene to add using
J G
PAUSE, FWD,
L
, or SLOW.
EDIT(ORIGINAL)
TITLE: CH33 FINE
TITLE INFO: 10/4 MON 8:09 PM – 8:14 PM
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
ADD SCENE
MOVE TITLE
PLAY PLAYBACK ENTER SET START POINT
2 2 2 2 2 Press SET/ENTER at the start
point of the scene you want to
add.
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
ADD SCENE
MOVE TITLE
SET END POINT
ENTER
• If you fast reverse to a scene prior to
the start point, the start point will be
canceled.
• When the start point is set to near the
beginning of a chapter, the beginning
of the chapter will be selected as the
start point. To make the original
designated start point effective, set it
again after combining the chapter
with the one immediately before
(page 66).
8
Press SET/ENTER at the end of
the scene you want to add.
ERASE SCENE
CHANGE TITLE NAME
1 / 2 5 2 SAT 1 : 0 8 2 AM
CHANGE THUMBNAIL
DIVIDE CHAPTER
ADD SCENE
MOVE TITLE
• Press RETURN to reselect the start
point of the scene. You can press
RETURN to reselect the end point
RETURN
even after it is already set.
• When the end point is set to near the
end of a chapter, the end of the
chapter will be selected as the end
point. To make the original desig-
nated end point effective, set it again
1 / 2 5 2 SAT 1 : 0 8 2 AM
after combining the chapter with the
next chapter (page 66).
9
2
Press Red (B) (CONFIRMING) to
01
00 : 00: 00
confirm the content.
04
Press Yellow (D) (ADD) to add.
SPECIFY RANGE TO
ADD
• If you press Red (B) (CONFIRMING),
you can test play the added scene,
from the start point to the end point. It
may take about one minute for the
confirm screen to appear.
• Press Yellow (D) (ADD) to add.
F
STILL/
10
K
REV, ,
1 1 1 1 1 Press \ / | to select "YES".
2 2 2 2 2 Press SET/ENTER.
1 / 2 5 2 SAT 1 : 0 8 2 AM
• The scene is added after the selected
title, and stored as a new title of the
play list.
2
01 11
Press EXIT to exit from EDIT
00 : 00 :12
00
mode.
SPECIFY RANGE TO
ADD
• A chapter mark is automatically set at
the start point where the scene is
added.
NOTE
• When adding a scene, select a scene
which continues for at least 3 seconds.
Scenes shorter than 3 seconds cannot be
added.
2
• Scenes can only be added and erased a
01
00 :00: 47
maximum of 50 times per title.
09
• If you press
SPECIFY RANGE TO
ADD
beyond the start point after setting a start
point, the start point will cancel.
• If scenes have been added or erased 51 or
more times to a single title in a disc using
another DVD recorder, Editing (Recording)
may not function.
2
01
00: 00: 12
09
CONFIRM CONTENT?
n
RETURN
CONFIRMING ADD
G K
REV or and reverse