Job Memory - Sharp AR-407 Operation Manual

JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL STORE/DELETE
JOB PROGRAMS
PRESS PROGRAM NUMBER.
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL DELETE
RECALL STORE/DELETE
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL STORE/DELETE
8 9
LEAR
PROGRAM
0
P
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
STORE/DELETE
Deleting a stored job program
Follow steps 1 and 2 in "Storing a job program" on the
1
EXIT
previous page. (1. Press the PROGRAM (
2. Press the "STORE/DELETE" key.)
Select the storage register number of the program to be
2
deleted.
Press the "DELETE" key.
3
STORE
Press the "EXIT" key to exit the job memory mode.
4
EXIT
CLEAR Recalling a job program
C
Press the PROGRAM (
1
Select a stored program from 1 to 9 on the touch panel.
2
EXIT
Be sure to select a number which contains a stored program. If
not, "Storing a job program" operation will start.
The program will be deleted from memory.
To cancel deletion, press the "CANCEL" key.
The JOB PROGRAMS screen will appear on the touch panel.
The numbers which are indicated are program numbers which
contain stored programs.
All selections stored in the program will appear on the touch
panel.
The recalled settings may be modified for a particular job run, but
any changes made will not be stored in the job memory. To store
the new settings, follow the "Storing a job program" procedure.

JOB MEMORY

) key.
P
) key.
P
2-19