Finisher (Ar-Fn1N); Part Names; Specifications - Sharp AR-407 Operation Manual

FINISHER (AR-FN1N)

The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and
the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the
previous set.

PART NAMES

Top tray
Second tray
(not used in the copy mode)
Offset tray
When copying onto size A3 (11" x
17") paper, lower the metal support
located at the tip of the offset tray.
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size A3 (11" x 17") paper.

Specifications

Top cover
Finisher release lever
Tray capacity Top tray:
Second tray: 500 sheets
Offset tray:
Paper size Top tray:
Second tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray:
Paper weight Top tray:
Second tray: 64 to 105 g/m
Offset tray:
For paper weighing more than 105 g/m
(8-1/2" x 11") is the maximum size.
Offset 30 mm (1.2 inch)
Paper size A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
for stapling
Stapling capacity 50 sheets (80 g/m
(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") paper)
Power supply Drawn from the copier
Weight Approx. 50 kg (111 lbs.)
Dimensions 590 mm (W) x 560 mm (D) x 998 mm (H)
(23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H))
Specifications are subject to change for improvement without notice.
Paper feed area cover
Paper transport area cover
Stapler unit
500 sheets
1,500 sheets (A4 (8-1/2" x 11"))
750 sheets (larger than A4 (8-1/2" x 11"))
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
A4 to A3 (8-1/2" x 11" to 11" x 17")
52 to 128 g/m 2 (14 lbs. to 34 lbs.) (when face up)
2
64 to 105 g/m (17 lbs. to 28 lbs.) (when face down)
2 (17 lbs. to 28 lbs.)
2
64 to 128 g/m (17 lbs. to 34 lbs.) (when face up)
2
64 to 105 g/m (17 lbs. to 28 lbs.) (when face down)
2
2
(21 lbs.))
(28 lbs.), A4
7-3