Disabling Deletion Of Job Programs; Disabling Of Document Feeder - Sharp AR-407 Operation Manual

Disabling Deletion of Job Programs

This program is used to prevent stored programs from being replaced
or deleted. If this program is set, storing of job programs is also
disabled.

Disabling of Document Feeder

This program is used to prevent the use of the document feeder when
it malfunctions.
Disabling of Duplex Copying
This program is used to enable or disable the duplex system. If a
malfunction occurs within the duplex system of the copier, the system
can be disabled until it is serviced. The rest of the copier in the
meantime will remain operable.
KEY OPERATOR PROGRAMS
To prevent job programs stored in memory from being
replaced or deleted, press the check box of "DISABLING
DELETION OF JOB PROGRAMS." to display a check mark in
the check box.
To allow replacement/deletion, press the check box of this
program again to clear the check mark in the check box.
To prohibit use of the document feeder, press the check box
of "DISABLING OF DOCUMENT FEEDER." to display a check
mark in the check box.
To enable use of the document feeder, press the check box
of this program again to clear the check mark in the check
box.
To disable the duplex system, press the check box of
"DISABLING OF DUPLEX COPYING." to display a check
mark in the check box.
To enable the duplex system, press the check box of this
program again to clear the check mark in the check box.
8-25