Centring - Sharp AR-407 Operation Manual

IMAGE EDITING FUNCTIONS
INTERRUPT
CLEAR ALL
CA
START
CLEAR
C
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO AUTO A4
EXPOSURE PAPER SELECT

CENTRING

3-22
Press the START (
8
Scanning of the first section will start.
After the first section of original pages has been fed and
9
the START lights up, remove the scanned originals from
the exit area, set the next section of original pages into
READ-END
the document feeder tray and press the START (
Repeat this sequence until all sections have been fed.
100%
Then press the "READ-END" key on the touch panel.
COPY RATIO
Copying will start at this time.
When the original and copy paper are of different sizes, CENTRING is
used to shift the image as a whole to the centre of the copy paper.
The image will shift only in the left to right direction, not in the top to
bottom direction.
This function will not work when non-standard size originals or copy
paper are used. This function cannot be selected when enlargement
copying has been selected.
Place the originals in the document feeder tray or on the
1
document glass.
) key.
) key.