Furuno FM-8800D Service Manual page 50

16
1-4
18R
16R MMSI
17
VOL 0-10
20R
17R Year/Day/Time
18
SQA, SQ 0-10
19R
DISTRESS MODE (DIST. MODE) is:
This mode is displayed after transmitting Distress Alert by Transceiver unit or
Remote station (Handset). In this mode setting, voice communication through
Transceiver unit and Remote station is equally prioritized. For example, even if the
Remote Handset side is OFF-HOOK, "OCCUPIDE xxxx" is not shown in
Transceiver unit. This state continues until the power is turned off.
Also, when the program is Russian Ver., it is continued until the power is OFF or
until it continues pressing the [CANCEL] key 3 seconds or more.
Unavailable functions by DISTRESS MODE are as below.
- [FILE] key operation
- [MENU] key operation
- Edit and call the DSC messages by [CALL] key operation
- [SHIFT] -> Intercom function of [4:IntCom]
- [SHIFT] -> Operation for changing ACK of [5: ACK]
- [SHIFT] -> Operation for printing [6: Print]
- SQ and AF Volume of Remote Handset cannot be adjusted. SQ control depends
on Transceiver SQ control.
↑
VOL: [SHIFT]->[ ], [
SQA: [SHIFT]->[SQ auto]
SQ 0-10:
[SHIFT]->[SQ]->[>], [<]
Indicates Remote Handset number
NOTE:
Turn on the power while pressing Remote
Handset [MENU] key to set, and set Remote
Handset ID number.
Display registered MMSI on [MENU] -> System ->
Self-ID
↓
VOL: SP volume adjustments for Remote Handset
]
YEAR/DATE/TIME used to Time stamp of LOG
are displayed.
ZDA>RMC>auto data is displayed. In case of
Manual input, set in the [MENU] -> RTC.
- SQA: Indicates when SQ Auto is set up.
- SQ 0-10: Indicates when SQ is set up manually.
1-6
1.2 Operation