Burner Control Status—Lockout; Burner Control—Diagnostic Information; Burner Control—Enter Password; Burner Control—Password Login - Honeywell S7999B Manual

S7999B SYSTEM DISPLAY
If the burner control is currently in a lockout condition, the
lockout cause is displayed on the screen (Fig. 57). The
lockout fault is also visible in the fault history. If audio alarm is
enabled for fault conditions (see User Preferences), then an
audio alarm sounds when the lockout occurs. To turn off the
audio alarm, the user views the fault history through the
"Show Faults" button or by resetting the burner control.
Fig. 59. Burner Control—enter password.
Fig. 57. Burner Control status—lockout.
The "Diagnostic Info" button displays the terminal and jumper
states of the burner control (Fig. 58).
Fig. 60. Burner Control—password login.
Finally, confirm that the Burner Control is to be remotely reset.
Fig. 58. Burner Control—diagnostic information.
The "Remote Reset" button allows the user to remotely reset
the burner control (Fig. 61). Extreme care should be exercised
before proceeding with the reset (Disabled for S7810M1029).
The user must log in with a valid S7999B System password
Fig. 61. Burner Control—Remote Reset.
before performing a remote reset (Fig. 59 and 60).
65-0283—2 36