Camera Tamper; Restricted Access Camera - Interlogix TruVision NVR 11 User Manual

Camera tamper

You can setup the recorder to alert you when the camera view has changed such as
when someone has deliberately blocked the camera view by spraying paint on the lens
or by moving the camera. Tampering detection only applies when the whole image is
covered and all light is blocked. You can select a specific area of the camera screen to
detect tampering.
Note: It is strongly recommended not to configure for video tampering when using PTZ
dome cameras.
To set up video tampering detection:
1. From the menu toolbar, click
2. Select a camera to configure for video loss detection.
3. Select the Enable Camera Tamper
4. Select the tamper detection sensitivity level by clicking the sensitivity scroll bar. The
maximum sensitivity value is 3.
5. Set up the tamper detection area.
Using the mouse, click and drag a privacy-mask box in the camera view window
over the desired area. You can set up one area. Click
Apply to save settings.
6. Select the arming schedule for the tamper.
Click Actions and then select the
week and the time periods during the day when motion can be recorded. You can
schedule up to eight time periods in a day. Default is 24 hours.
Click Apply to save the settings. Click
the week and holiday period.
Note: The time periods defined cannot overlap.
7. Select the response method.
Click Actions and then select the
want the recorder to notify you of the alarm: Full-screen monitoring, Enable alarm
audio, Notify alarm host, Send email, and Trigger alarm output. See page 105 for
the description of alarm notification types.
Click Apply to save settings and then
8. Click Exit to return to live view.

Restricted access camera

Restricted access cameras are cameras that are only visible to specific users.
TruVision NVR 11 User Manual
Camera Setup > Camera
checkbox to enable the feature.
Arming Schedule
Copy to copy the settings to other days of
Actions tab to select the method by which you
OK to return to the main window.
Chapter 10: Camera setup
Tamper.
Clear to delete the area. Click
tab to select the day of the
79