Specifications - Sharp MD-MT866H Operation Manual

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.
Power source DC 1.2V:
DC 5V:
DC 1.5V:
DC 1.5V:
Power consumption 7 W (AC adaptor)
Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time Approx. 3.5 hours
Battery life When using the rechargeable battery
(fully charged) included with the unit
When using one, commercially available, high
capacity, "AA" size (LR6), alkaline battery (The
rechargeable battery is in the unit, discharged)
When using one, commercially available, high
capacity, "AA" size (LR6), alkaline battery with
the rechargeable battery (fully charged)
The continuous recording time is for analogue inputs when the volume level is set to "VOL 0"
(LCD edge light off).
The continuous play time shows the value when the volume level is set to "VOL 15" (LCD
edge light off).
The above values are the standard values when the unit is charged and used at an
ambient temperature of 20 C (68 F).
The operating time when using an alkaline battery may be different, depending on the
type and manufacturer of the battery, and on the operating temperature.
54
Web-site: www.sharp.co.uk/support
Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
AC adaptor (AC 230 - 240V, 50/60 Hz)
Commercially available, "AA" size (LR6), alkaline battery x 1
Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive earth electrical system)
Continuous recording: Approx. 6.5 hours
Continuous play:
Continuous recording: Approx. 6 hours
Continuous play:
Continuous recording: Approx. 15.5 hours
Continuous play:
Help Line: 08705 274277 (office hours)
Approx. 12 hours
Approx. 18 hours
Approx. 30 hours