Editing A Recorded Minidisc - Sharp MD-MT866H Operation Manual

Editing a Recorded MiniDisc

To erase tracks one at a time
1
Start playing the track to be erased, and
press the 06 06 button.
06 06 06
2
Press the EDIT button repeatedly to select
"ERASE".
3
Press the right shuttle switch toward
"ENTER/SYNC".
To cancel the operation, press the •
4
Press the right shuttle switch toward
"ENTER/SYNC" again.
The track will be erased.
5
To erase other tracks, repeat steps 1 - 4.
44
Web-site: www.sharp.co.uk/support
To erase all of the tracks at once
1
Whilst in the stop mode, press the EDIT but-
ton repeatedly to select "ALL ERASE".
2
Press the right shuttle switch toward
"ENTER/SYNC".
To cancel the operation, press the •
3
Press the right shuttle switch toward
"ENTER/SYNC" again.
/ :OFF button.
All of the tracks will be erased.
Caution:
Once a track has been erased, it can not be recovered.
Check the track number before erasing it.
Help Line: 08705 274277 (office hours)
/ :OFF button.