Titling A Minidisc - Sharp MD-MT866H Operation Manual

Titling a MiniDisc

Creating disc and track names
One disc name and up to 255 track names can be created
per disc (A maximum of 100 characters for the disc and
each track name and a total of 1,700 characters can be
entered).
1
Disc name
Whilst in the pause
mode, press the EDIT
button repeatedly to
select "DISC NAME".
2
Press the right shuttle switch toward "ENTER/SYNC".
Cursor
The unit will enter the character input mode.
The MiniDisc lid will be locked, to cancel the
operation, press the •
3
Press the DISP button repeatedly to select
the type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
40
Web-site: www.sharp.co.uk/support
4
Move the right shuttle switch to 5
repeatedly to select the letter.
Track name
5
Whilst in the pause
Press the right shuttle switch toward
mode, press the EDIT
"ENTER/SYNC" to enter it.
button repeatedly to
select "TRACK NAME".
6
To enter more letters, repeat steps 3 - 5.
7
When the name has been completely en-
tered, press the EDIT button.
/ :OFF button.
8
TOC will be displayed to write the updated
contents to the MiniDisc press the •
button.
You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.
Help Line: 08705 274277 (office hours)
5 or 4
5 5
5
Position where the next letter will be entered
4 4 4
4
/ :OFF