Sharp MD-MT866H Operation Manual page 25

Playback : continued
1
Insert the earphones plug firmly into the
earphones socket on the remote control
unit.
2
Plug the remote control into the
on the unit.
3
Insert a MiniDisc (page 17).
4
Press the 06 06 button.
06 06 06
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against
accidental erasure (Auto-play function).
To interrupt playback
Press the 06 button.
To resume playback, press the 06 button again.
To stop playback
Press the • / :OFF button.
If the unit is not operated for at least 2 minutes whilst
in the stop mode, the power will shut off automatically.
To turn off the power
Press the • / :OFF button whilst in the stop mode.
Volume control
Move the left shuttle switch to VOL+ to increase the
volume and the left shuttle switch to VOL– to de-
crease the volume.
socket
Bass control
Each time the left shuttle switch is pressed toward
"BASS (Remote control: the SOUND button is
"
pressed), the tone will be switched as follows.
BASS 1
BASS 2
BASS 3
BASS OFF
Notes:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
If you connect the AC adaptor without installing the re-
chargeable battery, playback may start automatically. Be
sure to turn off the power.
Reduce the volume before starting to play. MiniDiscs, com-
pared to ordinary cassette tapes, have very little noise. If
the volume is adjusted according to your usual expecta-
tions of noise, high volume may damage your hearing.
The sound escaping from your earphones may annoy
people around you.
In particularly crowded places (such as on trains or
buses), reduce the volume.
Web-site: www.sharp.co.uk/support
Volume (0 - 30)
Emphasised slightly
Emphasised more
Emphasised fully
Cancelled
Help Line: 08705 274277 (office hours)
25