Inserting A Minidisc - Sharp MD-MT866H Operation Manual

Inserting a MiniDisc

4
1
When you record on a
MiniDisc, check that the
Check that the erase-protection
erase prevention tab is
Recordable Recording tab is in the recordable position.
set to the "recordable"
prevented
position.
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
2
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:
Do not place the MiniDisc under the holder.
3
If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
The lid can not be opened if "TOC" is displayed refer to
the instruction on page 22.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
17