Sharp MD-MT866H Operation Manual page 21

Recording : continued
1
Press the REC button.
Record pause mode is entered.
The REC button does not light.
2
Begin playback on the stereo system con-
nected to this portable MD.
To enable the record level to be set.
3
Move the right shuttle switch to 5
to adjust the recording level.
Analogue recording
Adjust the recording level so that the maximum
sound volume from the source makes the read-
ing swing somewhere between –4 dB and 0 dB.
Level meter indicator
Digital recording
You can adjust the level in 1 dB increments within
the range of +12 - –12dB.
Once you adjust the digital recording level, the
setting remains even after the recording stops.
(For cancellation instructions, see page 38.)
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode at
the point you wish to start recording.
Here you can select the track to be recorded.
5
Press the 06
unit recording.
5 or 4
6
5 5 5 4 4 4 4
Begin playback on the stereo system, the
output will be recorded.
Notes:
Changing the volume level whilst recording does not af-
fect the recording.
You cannot adjust the bass level whilst recording.
0dB
4dB
+12 - –12dB
Web-site: www.sharp.co.uk/support
06 button to start the MiniDisc
06 06 06
Help Line: 08705 274277 (office hours)
21