Table of Contents
Advertisement
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang-
es for product improvement without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in individual units.
„ General
Power source:
DC 5V:
AC adaptor (AC 110-240V, 50/60 Hz)
DC 1.5V:
Commercially available, "AA" size
(LR6), alkaline battery x 1
DC 1.2V:
Optional rechargeable Nickel-Metal
Hydride battery (AD-N70BT) x 1
DC 4.5V:
Optional car adaptor, AD-CA20X(for
cars with a 12 - 24V DC negative earth
electrical system)
Power con-
0.15 A (AC adaptor)
sumption:
Output pow-
RMS; 20 mW (10 mW + 10 mW)
er:
(0.2% T.H.D.)
Charging
Approx. 3.5 hours (90 %)
time:
Approx. 5.5 hours (fully charged)
(When using the AC adaptor included
with the unit)
46
Battery life:
When using the optional
When using a commercial-
rechargeable battery (fully
ly available, high capacity,
charged)
"AA" size (LR6), alkaline
battery
Continuous recording:
Continuous recording:
Approx. 7 hours
Approx. 3 hours
Continuous play:
Continuous play:
Approx. 12 hours
Approx. 12 hours
z The continuous recording time is for analogue inputs
when the volume level is set to "VOL 0".
z The continuous play time shows the value when the
volume level is set to "VOL 15".
z The above values are the standard values when the
unit is charged and used at an ambient temperature of
25°C (77°F).
z The operating time when using an alkaline battery
may be different, depending on the type and manufac-
turer of the battery, and on the operating temperature.
00/12/26
80SCA_40_47.FM
Advertisement
Table of Contents
