Advanced Recording - Sharp MD-MT866H Operation Manual

Advanced Recording (continued)
About track numbers
1. Track numbers are created automatically during re-
cording via the analogue connection when a silence
of 1 second or more is detected (Auto marker func-
tion). A series of tracks can be recorded as one by
disabling the auto marker function see page 31.
First
track
2. When recording from a CD or a MiniDisc using the
digital connection, track numbers will be created at
the same points as on the CD or MiniDisc (Synchro
marker function).
First track Second track Third track
Playback
Track A Track B
side
First track Second track Third track
Recording
Track A Track B
side
Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
The track numbers on the playback side may not match
the track numbers recorded on the MiniDisc.
32
Web-site: www.sharp.co.uk/support
When recording, if a programmed playback is performed
by the source or playback is performed by selecting
tracks manually, the MiniDisc track numbers may not be
the same as on the source.
Track numbers may not be created properly, depending
on the connected stereo system.
About 1
second
Silence
About sampling rate converter
Second
track
This portable MD incorporates a sampling rate converter
meaning it can record from digital radios or DAT tape re-
corders.
Note for digital recording
You can not copy a MiniDisc that you recorded from digital
Track C
inputs to another MiniDisc or DAT. It is prevented by the
SCMS (Serial Copy Management System). Recording from
analogue inputs is not affected.
Track C
Digital signals
CD player,
MiniDisc
player,
etc.
Help Line: 08705 274277 (office hours)
Digitally recorded Cannot record
MiniDisc
Digital Digital
connection connection