Battery Disposal (Md-Ms702 Only); Specifications; Operation Manual - Sharp MD-MS701W Service Manual

Contains nickel cadmium (or sealed lead) battery. Must be
recycled or disposed of properly. Remove the battery from the
product and contact federal or state environmental agencies
for information on recycling and disposal options.
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
General
Power source: DC 3.6 V (rechargeable lithium-ion
DC 5 V (AC adaptor)
DC 3V:
MD-MS701W: AC 110 - 240V, 50/60Hz
MD-MS702: AC 120V , 60Hz
DC 3V:
DC 4.5V: Separately available car
Power consumption: 0.15 A (AC adaptor)
4 W
Output power: RMS; 20 mW (10 mW + 10mW)
(0.2% T.H.D.)
Charging time: Approx. 2.5 hours
(When using the AC adaptor included
with the unit)
Battery life:
When using two,
commerically available,
When using the
high capacity, "AA" size,
rechargeable battery (fully
alkaline batteries (in the
charged) included with the
separately available battry
unit
case)
Continuous recording:
Continuous recording:
Approx. 4 hours
Approx. 3.5 hours
Continuous play:
Continuous play:
Approx. 8 hours
Approx. 5 hours
The continuous recording time is for analogue input when the
volume level is set to "VOL 0".
The continuous play time shows the value when the volume level is
set to "VOL 15".
The above values are the standard values when the unit is charged
and used at an ambient temperature of 20
The operating time when using alkaline batteries may be different,
depending on the type and manufacturer of the batteries, and on
the operating temperature.
Recording
Input sensitivity:
level
MIC H
MIC L
LINE
Output level:
Headphones
LINE

BATTERY DISPOSAL (MD-MS702 ONLY)

SPECIFICATIONS

battery x 1)
Separately available battery
Separately available battery
case, AD-M70BC
(commercially available, "AA"
size, alkaline battery x 2)
adaptor, AD-CA20X
(for cars with a 12-24V DC
negative earth electrical
system)
When using two, commercially
available, high capacity, "AA"
size batteries with the
rechargeable battery (fully
charged)
Continuous recording:
Approx. 7.5 hours
Continuous play:
Approx. 13 hours
o
C.
Reference input Input
level impedance
0.25 mV 10 k ohms
2.5 mV 10 k ohms
100 mV 20 k ohms
Specified Maximum
Load
output output level
impedance
— 10 mW + 32 ohms
10 mW
300mV — 50 kohms
(-12dB)
Dimensions:
Weight:
Input socket:
Output socket:
MiniDisc Recorder
Type:
Signal readout:
Audio channels:
Frequency response:
Rotation speed:
Error correction:
Coding:
Recording method:
Sampling frequency:
Wow and flutter:
Specifications for this model are subject to change
without prior notice
– 3 –
MD-MS701W/MS702
Width: 87.0 mm (3-7/16")
Height: 29.4 mm (1-3/16")
Depth: 81.5 mm (3-7/32")
MD-MS701W: 216 g (0.48 lbs.) with
rechargeable battery
MD-MS702: 219 g (0.49 lbs.) with
rechargeable battery
Line/optical digital, microphone
(powered by the main unit)
Headphones (impedance: 32
ohms)/remote control unit
Portable MiniDisc recorder
Non-contact, 3-beam semi-coductor
laser pick-up
Stereo 2 channels/monaural (long-
play mode) 1 channel
20 - 20,000 Hz (± 3 dB)
Approx 400 - 900 rpm
ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
ATRAC (Adaptive TRansform
Acoustic Coding), 24-bit computed
type
Magnetic modulation overwrite
method
44.1 kHz (32 kHz and 48 kHz
signals are converted to 44/1 kHz,
and then recorded.)
Unmeasurable (less than ±0.001%
W.peek)