Positioner Configurations - Agilent Technologies 85301B Configuration Manual

41 Polarization Axis Postioner
o
o
o
o
43
Polarization Control Cables
o
Polarization control cables are not required
o
Utilize existing polarization control cables
o
Polarization control cables are required;
indicate required lengths for all cables.
Power and limits cable length:______m
42
Polarization Axis Controller
o
o
o
Figure 24. Positioner configuration for source antenna side of range
48
Positioner Control Cables
o
Polarization control cables are not required
o
Utilize existing polarization control cables
o
Polarization control cables are required;
indicate required lengths for all cables.
Tachometer cable length:______m
46
Positioner Controller
o
Positioner controller is not required
o
Utilize existing positioner controller; model #:______
o
Positioner controller is required
Figure 25. Positioner configuration for AUT side of antenna range
Polarization axis positioner is not required
Utilize existing polarization positioner; model #:______
Low-speed, high-accuracy polarization positioner is required
High rotation speed, low-positioning accuracy
polarization positioner is required
Polarization axis controller is not required
Utilize existing polarization axis controller; model #:______
Polarization axis controller is required
Antenna
Under Test
Synchro cable length:______m
Control cable length:______m
Source
Antenna
Synchro cable length:______m
45
Roll Axis Model Tower
o
Model tower/roll axis is not required
o
Utilize existing model tower; model #:______
o
Utilize existing roll axis; model #:______
o
Model tower is required
o
Roll axis is required
44
AUT Positioner
o
Utilize existing positioner; model #:______
o
AUT positioner is required;
indicate axis required:
o
upper azimuth
o
elevation
o
lower azimuth
Power limits cable length:______m
47
Positioner Power Supply
o
Positioner power supply is not required
o
Utilize existing power supply; model #:______
o
Positioner power supply is required
35