Override Entries; Correction After Finalizing Atransaction (Void Mode) - Sharp XE-A303 Instruction Manual

OVERRIDE ENTRIES

Programmed limit for functions (such as for maximum amounts) can be overridden by making an entry in the
MGR mode.
Key operation example
REG mode
entries
Turn the mode switch
to the MGR position.
Return the mode switch
to the REG position.
CORRECTION AFTER FINALIZING A
TRANSACTION (Void mode)
When you need to void incorrect entries that clerks cannot correct (incorrect entries found after finalizing a
transaction or cannot be corrected by direct or indirect void), follow this procedure:
1.
Turn the mode switch to the
into the void mode. In the void mode, the back light of the operator display turns red.
2.
Repeat the entries that are recorded on an incorrect receipt. (All data on the
incorrect receipt is removed from register memory; the voided amounts are
added to the void mode transaction totalizer.)
Incorrect receipt
90
1.
Turn the mode switch to the MGR position.
2.
Make an override entry.
In this example, the register has been programmed not to allow
discounts entries over 1.00.
£
1500
-
250
...Error
l
-
250
A
position using the manager key (MA), to enter
OPX/Z
PGM
Print
OPX/Z
PGM
Cancellation receipt
REG
MGR
X1/Z1
X2/Z2
REG
MGR
X1/Z1
X2/Z2