Sharp XE-A303 Instruction Manual page 64

5. Entry digit limit programming (Press
(1) Enter entry digit limit using numeric key.
The entry digit limit can be set up to 8.
Default setting is 8.
The entry digit limit is in effect for REG mode
operation but can be overridden in the MGR mode.
The entry digit limit is represented by the number of
allowable digits for the maximum entry or total
amount. When "0" is set, the operation of the
corresponding key is prohibited.
s
(2) Press the
In the case of programming for the
keys, "CH2 PROGRAMMING" and "CR2
PROGRAMMING" respecitively will be displayed on
the upper line, and the corresponding function no.
on the lower line. Go to step 2 to program the
b
and keys.
In the case of programming for the
b
and keys, the display shows
"ENTER[TL/NS]KEY". Go to step 6.
6. Terminate programming
A
(1) Press the
programming.
Item:
A Footer print
B Amount tendered entry
C Entry digit limit
62
s
key to register the setting.
X
and
r R
,
X
key to terminate the
A
to skip. / Press
c
Y
Y
,
key
Selection:
No*
Yes
X
Non compulsory (for
c b
Inhibit (for and )*
Compulsory
to terminate.)
LIMIT DIGITS
7
33
s
CH2 PRORAMMING
34
ENTER[00]KEY
34
A
Print
Text
Print:
0
1
Y
and )* 0
0
1
0-8 (default:8)
7
0.00
0.00
PGM
0.00
From left, ABC