Sharp XE-A303 Instruction Manual page 21

(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
6. VAT/tax2 status programming (Press
(1) Go to (2) when the VAT/tax 2 status does not need
to be changed from "TAX2 NO". Otherwise, press
key to display "TAX2 YES".
Each time key is pressed, the display shows
"TAX2 YES" and "TAX2 NO" alternately.
Default setting is "NO" for dept. code 1 to 10 and 21
to 99, and "YES" for dept. code 11 to 20.
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
7. VAT/tax3 status programming (Press
(1) Go to (2) when the VAT/tax 3 status does not need
to be changed from "TAX3 NO". Otherwise, press
key to display "TAX3 YES".
Each time key is pressed, the display shows
"TAX3 YES" and "TAX3 NO" alternately.
Default setting is "NO".
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
8. VAT/tax4 status programming (Press
(1) Go to (2) when the VAT/tax 4 status does not need
to be changed from "TAX4 NO". Otherwise, press
key to display "TAX4 YES".
Each time key is pressed, the display shows
"TAX4 YES" and "TAX4 NO" alternately.
Default setting is "NO".
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
key to register the setting.
key to register the setting.
key to register the setting.
key to register the setting.
1
QUICK START GUIDE
Part
to skip. / Press
to skip. / Press
to skip. / Press
2
Part
SELECT OF TAX2
TAX2
to terminate.)
SELECT OF TAX3
TAX3
to terminate.)
SELECT OF TAX4
TAX4
to terminate.)
REGIST. TYPE
06 NORMAL
3
Part
NO
NO
NO
19