Sharp XE-A303 Instruction Manual page 20

3. Unit price programming (Press
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
4. Entry type programming (Press
(1) Press key 3 times to display "PRESET".
Each time
"INHIBITED", "OPEN", "PRESET" and "OPEN &
PRESET" in this order.
Default setting is "OPEN".
When the unit price is changed from the default
setting ("0") in step 3, "OPEN & PRESET" will be
displayed first.
However, when the default setting is not changed,
"OPEN" will be displayed first.
(2) Press the
On the upper line of the display, guidance message
for the next step will be displayed.
On the lower line of the display, the current setting
will be displayed.
5. VAT/tax 1 status programming (Press
(1) Go to (2) when the VAT/tax 1 status does not need
to be changed from "TAX1 YES". Otherwise, press
key to display "TAX1 NO".
Each time
"TAX1 NO" and "TAX1 YES" alternately.
Choose "YES" for taxable and "NO" for non-taxable.
Default setting is "YES" for dept. code 1 to 10 and
21 to 99, and "NO" for dept. code 11 to 20.
When any entry of a taxable department is made in
a transaction, tax is automatically computed
according to the associated tax rate as soon as the
transaction is completed.
18
key to register the unit price.
key is pressed, the display shows
key to register the entry type.
key is pressed, the display shows
to skip. / Press
to skip. / Press
to skip. / Press
to terminate.)
PRICE
300
06
DEPT ENTRY TYPE
06 OPEN & PRESET
to terminate.)
DEPT ENTRY TYPE
06
SELECT OF TAX1
TAX1
to terminate.)
300
PRESET
YES